Does your ceiling limit you? GAIA SOLVES IT!

Gaia Pole, as a real Brazilian, never gives up! And because it was created by an engineer with a keen eye for Pole Dance, it not only develops innovative technologies for poles, but also structural solutions to install them safely in any location that doesn’t have a slab/concrete ceiling.

And why is this necessary?

Every Pole Bar must be installed between a rigid floor and ceiling. In other words, you must have a solid surface to be able to attach your pole to, whether it’s screwed or press-fit.

And that’s where Structural Solutions come in

With our structural options, none of this stops you from having a Gaia!

And we're going to prove it…

Plaster Ceiling Extender

For plaster or drywall ceilings

Order this solution here

This structure is installed between the ceiling and the slab of your property. To do this, a small cut is made in the plaster for setup, which can be closed later, leaving only the finish visible (available in black or white).

It works like an interface: the Extender is screwed directly into the slab, through the gap between it and the plaster, in the exact size of this gap. In other words, it is tailor-made for you.

The extender is made of carbon steel, offering the safety you need to practice! This is where you can install your Gaia pole – either pressure or screwed.

This means that, with the Plaster Ceiling Extension, you can choose any Gaia to call your own!

Beam or sloping ceiling support

To fix the angle or for wooden beams

Order this solution here

When the space where you want to install the pole has a sloping ceiling or is under a beam, this solution is perfect!

It works like this:

The Beam Support “ wraps around” the beam and is screwed into it. That’s why it’s made exactly to the beam’s width! It also has an adjustable angle if there is a slope. When it comes to sloping ceilings, the Bracket is produced with a straight finish.

This structure connects to the pole with a system similar to a hinge – always using carbon steel, finished in black or white.

This is how you make the precise angular adjustment to install your Gaia. And you’ll have all the freedom to choose your favorite, because all models, whether pressure or screwed, can be safely installed here.

Corner support

For your special Pole corner Install on two connecting walls

Order this solution here

Do you know that perfect corner for your Pole? Gaia has the solution. This carbon steel support – black or white – stands on two side walls.

The standard size is 1.5×1.5m / 4.92 x 4.92ft, but we can adapt it to your needs!

It works like this:

Want to know another plus? You can also install overhead equipment on it.

V support

Just one wall that can be used? No problem!

Order this solution here

When all you have is a wall and a dream… Gaia comes with a V- frame that attaches to two points in your wall, making the perfect support for your pole!

Designed to occupy an area of 2m x 1.5m / 6.56m x 4.92ft, we can also adjust this measurement to suit your needs!

The pole is screwed to the support at the top and to the floor at the bottom. We therefore recommend the Quick Lock, Story or Standard fixed models. However, it is compatible with all Gaia, except the Portable models and the All in One.